YHN-11/0-45°
Glass linear multistage edging machine
1、 Product introduction
It is suitable for grinding straight edge and 0-60 ° edge of flat glass with different thickness and size. The first five grinding heads can swing 0 ~ 60 ° at will, and the grinding wheel can advance and retreat as a whole when the angle is adjusted.
Rough grinding, fine grinding, polishing and chamfering shall be finished at one time.
The front and rear crossbeam, base bed and each grinding head adjusting seat are made of high-quality cast iron materials, which are annealed at high temperature for a long time, and then processed by rough and finish machining. It bears large load and has stable performance.
With advanced structure, high precision, convenient operation and high work efficiency, it is the preferred equipment for glass edging processing in the industries of large batch technology, furniture, household appliances, construction, etc.
2、 Technical parameters
Model: yhn-11-0 ~ 45 degree
1. Processing glass width: maximum size: 3000 × 3000mm, minimum size: 80 × 80mm
2. Processing glass thickness: 3-25mm
3. Conveying speed under no-load: 0.5m/min-5m/min
4. Overall dimension: 8200 mm × 1000 mm × 2500 mm
5. Weight: 4100Kg
6. The diagonal error of processed glass is ≤ 0.5mm/m
7. Parallel error of glass processing ≤ 0.3mm/m
8. Voltage: 380V
9. Frequency: 50 Hz
10. Total power: 26KW
11. The chamfering is polished, the upper 45 ° and the lower 45 ° are chamfered; the brightness is uniform and there is no edge collapse
12. The whole machine has no abnormal noise.