Yhl-08 fully automatic CNC drilling machine
Main performance parameters:
1. Model: yhl-08
2. Borehole diameter: 5-60mm
3. Processing glass thickness: 3-19mm
4. Maximum drilling stroke: 5-900mm
5. Working platform height: 900mm
6. Drilling speed: ≤ 7-10s
7. Maximum number of automatic drilling: 20pcs
8. Hole position deviation of batch products: ≤± 0.13 mm
9. Maximum size of processed glass: 600x1800mm
10. Power: 6kw
11. Weight: 1000kg
12. Overall dimension: 1650x1900x1600mm
13. Drilling method: drill down the hole first and then drill the upper hole
14. Drilling pipe requirements: be able to install the specification and model of drilling pipe specified by customers
During the drilling process, the product shall not be scratched twice, and the hole position shall not have defects such as small explosion edge and burr. The fillet of hole position shall be 45 ° and the yield of finished product shall not be less than 99.95%. The glass powder and glass block produced during drilling are easy to clean.
15. X-axis servo motor drive
16. Y-axis servo motor drive
17. PLC: Huichuan
18. Touch screen: Kunlun Tongtai
19. Servo motor: eles
20. Pneumatic Original: Seun Dongtai
21. Working mode: first input the graphic data of the products to be processed into the program, and then place the products to be processed on the drilling platform, align with the positioning points on both sides of the table, press the start button, the equipment will automatically move the position of the drilling pipe according to the program, and complete the drilling, and then manually take away the glass. The worktable can place two pieces of glass, and the two pieces of glass can be processed alternately.
Line body design and manufacturing standards
1. The production process runs smoothly, the structure is firm and reliable, and there is no abnormal phenomenon.
2. Each line body shall be installed firmly and straightly, and the purchased parts shall keep the original color. The steel shall be painted after rust removal and degreasing. The color shall be matched by computer according to the requirements of Party A. The whole line is beautiful and generous, and the paint surface is flat and smooth. The steel parts of the whole machine are blackened or galvanized except for the paint baking, and the stainless steel parts are not subject to surface treatment.
3. The design and manufacture of wire body, accessories and motor meet the relevant national standards.
