Yhn-371s glass straight front beam lifting bevel edging machine
1、 Product introduction
Yhn-371s glass straight front beam lifting bevel edge grinding machine is suitable for rough, fine grinding and polishing of straight bevel edge of flat glass and bottom edge grinding. Large pitch chain is used to transport glass, which has stable transmission and high grinding accuracy. The rear transmission plate is equipped with automatic cleaning device to keep it clean for a long time. It is equipped with automatic lubrication system to keep the whole machine working under good lubrication conditions. Pic is used for automatic and manual control, and human-computer interface display can be used to set processing glass thickness, residual thickness and bevel edge width after grinding The biggest characteristic is to change the drop between the front and rear guide rails by lifting the front guide rail, so as to expand the grinding glass size range and processing specifications. The machine has the characteristics of high lifting precision, strong rigidity, stable performance and high yield. It is suitable for large batch processing of glass mosaic and glass assembling process, with simple and convenient operation and strong practicability.
2、 Technical parameter table
model | YHN-371S |
Operating voltage / frequency | 3phase相380V/50Hz |
Feed rate | 0.4~5(m/min) |
Minimum dimension of processed glass(mm) | 20*20mm |
Maximum width of processed glass (mm) | 3000*3000mm |
Processing glass thickness (mm) | 3~19 |
Maximum width of beveled edge (mm) | 50 |
Angle range of bevel edge (mm) | 3o~45o |
Total power (kw) | 27.2 |
Total weight (kg) | 4800 |
Overall dimension (m) (LxWxH) | 6.8x1.5x2.4 |
Table height (mm) | 800 |